Wood Dryer for Sawdust, Bentonite, Bamboo, Wood Pellets Plant Efficient Palm Wire Dryer Manufacturers

• Customization: Available
• After-sales Service: 24-Hour Online Service
• Warranty: 1 Year
• Model NO.: JN1.2*12m-JN2.4*25
• Movement Way: Agitation
• Heating Mode: Transmission
• Material Status: Powder
• Drying Medium: Air
• Operation Pressure: Vacuum
• Drum Number: Double
• Type: Spray Type
• Original Moisture: 50% - 70%.
• Profession: Sawdust Mill, Coconut Husk, Palm Silk, etc
• Raw Material Specification: Powdery
• Moisture After Drying: 10%-15%
• Application: Applied in Chemical, Metallurgy, Building Material
• Factory Visit: Welcome
• Transport Package: None
• Specification: 10.00cm*10.00cm*10.00cm
• Trademark: JINNENG
• Origin: Jinan, Shandong
• HS Code: 8419399090
• Production Capacity: 300sets/ Month

Product Description

JN series tumble dryer is mainly used for drying wet materials such as powder, granular and small pieces, widely used in energy, fertilizer, chemical and pharmaceutical industries. The product has the advantages of large drying capacity, stable operation, low energy consumption, easy operation and high output.
In the biomass granulation process, if the raw material moisture does not meet the requirements of granulation, it is necessary to dry. Tumble dryer is a widely used drying equipment, can dry, wood chips, straw, rice, and other materials. The equipment is simple to operate and stable to run.
The hot air enters the dryer cylinder from the hot air stove, the material enters from the feed port, the material is raised by the lifting plate in the dryer, and then the hot air contacts the material and takes away the water in the material. The material comes out of the outlet, and the hot air is pumped away from the upper end. The movement of the material mainly depends on the promotion of the lifting plate. Tumble dryer, its own alone can not work, generally need to be equipped with, heat source (hot blast stove), fan, Shakron, and sometimes dust removal equipment. The tumble dryer itself is composed of a cylinder, a feed port, a discharge port, a tooth ring, and an aperture. Common drying materials: wood chips, straw, rice husk, peanut shell, coconut shell, palm silk, wine lees and so on.

Diameter	weight	Capacity	Fan power	Remark
JNØ1200*12M	6.9T	0.8-1T/H	11KW	Input raw material moisture 50%-70%, output dry product moisture is less than 15%
JNØ1500*15M	10.6T	1-1.5T/H	15KW
JNØ1600*16M	12.6T	1.5-2T/H	18.5KW
JNØ1800*18M	20.7T	2-2.5T/H	30KW